HOME

sh-3ll 1.0
DIR:/usr/local/jetapps/usr/share/rear/lib/
Current File : //usr/local/jetapps/usr/share/rear/lib/authtoken-functions.sh
#!/bin/bash

# This file is part of Relax-and-Recover, licensed under the GNU General
# Public License. Refer to the included COPYING for full text of license.

# As of this writing (August 2023) the functions in this authtoken-functions.sh file
# are only called by the ReaR system startup script /etc/scripts/unlock-opal-disks
# (its source code is usr/share/rear/skel/default/etc/scripts/unlock-opal-disks)
# so that this functions are meant to be executed only
# within the environment where /etc/scripts/unlock-opal-disks is running.
# This 'unlock-opal-disks' environment is a pre-boot volatile environment
# where all secret user input happens only in that pre-boot environment,
# and the image is immutable (PBA-area is RO on locked drive),
# see https://github.com/rear/rear/issues/3035#issuecomment-1662239427
# so secrets could not leak out from that environment.
# These functions are not properly implemented to be executed within other environments
# e.g. when called by other ReaR scripts during "rear mkrescue/mkbackup" or "rear recover".
# The main reason is that this functions could leak secrets when executed,
# in particular with 'set -x' (e.g. when rear is run in debugscript mode),
# see https://github.com/rear/rear/issues/3035
# Another reason is that user output and input is done via 'echo' and 'read'
# instead of using ReaR functions like LogPrint, UserOutput,... and UserInput
# which is correct here because those ReaR user input/output functions
# cannot be made available at ReaR system startup time
# because lib/lib/_input-output-functions.sh cannot be sourced there
# because lib/_input-output-functions.sh does also some special stuff
# (like adding EXIT_TASKS and STDIN STDOUT and STDERR redirections)
# cf. https://github.com/rear/rear/pull/2956#discussion_r1133701768
# and https://github.com/rear/rear/pull/2956#discussion_r1133714369

function authtkn_load() {
    # $1 container path
    # $2 container offset
    # $3 encryption key
    # $4 [bound_to_blockdev path]

    local intermediate_key=""
    local cipher
    local plain
    local ret

    cipher=$(token_read "$1" "$2"); ret=$?
    if [ $ret -ne 0 ]; then
        echo "authtkn_load(): token_read() failed: $ret" >&2
        return $ret
    fi

    if [ -n "$4" ]; then
        intermediate_key=$(blkdev_hash "$4" 2); ret=$?
        if [ $ret -ne 0 ]; then
            echo "authtkn_load(): failed to derive intermediate key from $4: $ret" >&2
            return $ret
        fi
    fi

    plain=$(decrypt_base64 "$cipher" "$3" "$intermediate_key"); ret=$?
    if [ $ret -ne 0 ]; then
        echo "authtkn_load(): decrypt_base64() failed: $ret" >&2
        return $ret
    fi

    echo $plain
    return 0
}

function authtkn_store() {
    # $1 container path
    # $2 container offset
    # $3 token plaintext
    # $4 encryption key
    # $5 [bind_to_blockdev path]

    local intermediate_key=""
    local cipher
    local tknlen
    local ret

    if [ -n "$5" ]; then
        intermediate_key=$(blkdev_hash "$5" 2); ret=$?
        if [ $ret -ne 0 ]; then
            echo "authtkn_store(): failed to derive intermediate key from $5: $ret" >&2
            return $ret
        fi
    fi

    cipher=$(encrypt_base64 "$3" "$4" "$intermediate_key"); ret=$?
    if [ $ret -ne 0 ]; then
        echo "authtkn_store(): encrypt_base64() failed: $ret" >&2
        return $ret
    fi

    tknlen=$(token_write "$cipher" "$1" "$2"); ret=$?
    if [ $ret -ne 0 ]; then
        echo "authtkn_store(): token_write() failed: $ret" >&2
        return $ret
    fi

    echo $tknlen
    return 0
}

function authtkn_wipe() {
    # $1 container path
    # $2 container offset
    # $3 [token length]

    # ensure byte-length counting
    LANG=C LC_ALL=C

    local ret
    local length
    local token

    if [ -z "$3" ]; then
        # taking existing token length
        token=$(token_read "$1" "$2")
        [[ $? -eq 0 ]] && length=${#token}
    else
        length=$3
    fi

    # will fail if length still undef
    token=$(garbage_base64 $length); ret=$?
    if [ $ret -ne 0 ]; then
        echo "authtkn_wipe(): garbage_base64() failed: $ret" >&2
        return $ret
    fi

    length=$(token_write "$token" "$1" "$2"); ret=$?
    if [ $ret -ne 0 ]; then
        echo "authtkn_wipe(): token_write() failed: $ret" >&2
        return $ret
    fi

    echo $length
    return 0
}


function token_read() {
    # $1 path
    # $2 [offset:0]
    # $3 [retries:2]

    # ensure byte-length counting
    LANG=C LC_ALL=C

    if [ -z "$1" ]; then
        echo "token_read(): none or empty token container path given" >&2
        return 1
    fi

    local rawchunk
    local length
    local payload
    local ret

    rawchunk="$(blkdev_read $1 4096 ${2:-0} ${3:-2})"; ret=$?
    if [ $ret -ne 0 ]; then
        echo "token_read(): blkdev_read() failed: $ret" >&2
        return $ret
    fi

    length=$(base64 -d <<< "${rawchunk:0:8}" 2>/dev/null | tr -d '\0' 2>/dev/null)
    if [ ${#length} -ne 5 ] || [[ $length =~ [^0-9] ]]; then
        echo "token_read(): read failed: invalid length specifier" >&2
        return 2
    fi
    length=$((10#$length))
    if (( length <= 0 )); then
        echo "token_read(): read failed: invalid length specifier" >&2
        return 2
    fi

    payload=${rawchunk:8:$length}
    if (( ${#payload} != $length )); then
        echo "token_read(): read failed: length mismatch: ${#payload} instead of expected $length" >&2
        return 2
    fi

    echo $payload
    return 0
}

function token_write() {
    # $1 payload
    # $2 path
    # $3 [offset:0]
    # $4 [retries:2]

    # ensure byte-length counting
    LANG=C LC_ALL=C

    local lenwr=${#1}
    # 4096 - 8 (lenb64) = 4088
    if [ -z "$1" ] || [ $lenwr -gt 4088 ]; then
        echo "token_write(): given payload is empty or too big: $lenwr" >&2
        return 1
    fi

    local lenb64
    local ret

    #supporting up to 5-figure length
    lenb64=$(base64 <<< $(printf '%05d' $lenwr) 2>/dev/null)
    if [ ${#lenb64} -ne 8 ]; then
        echo "token_write(): failed to encode token length specifier" >&2
        return 2
    fi

    lenwr=$(blkdev_write "${lenb64}${1}" "$2" ${3:-0} ${4:-2}); ret=$?
    if [ $ret -ne 0 ]; then
        echo "token_write(): blkdev_write() failed: $ret" >&2
        return $ret
    fi

    echo $lenwr
    return 0
}


function blkdev_hash() {
    # $1 block dev path
    # $2 [retries:1]

    # RETRY CASE: see notes in blkdev_read()

    if [ -z "$1" ]; then
        echo "blkdev_hash(): none or empty path given" >&2
        return 1
    fi

    local retries=${2:-1}
    local hash

    while [ -z "$hash" ]; do
        if [ ! -b "$1" ]; then
            echo "blkdev_hash(): blockdev path [$1] is invalid or device not yet ready" >&2
        elif [ ! -r "$1" ]; then
            echo "blkdev_hash(): missing read perm on given blockdev [$1]" >&2
        else
            hash="$(b2sum --binary $1 2>&1)"
            if [ $? -ne 0 ]; then
                echo "blkdev_hash(): hashing failed: $hash" >&2 # hash is stderr here
                hash=""
            else
                hash="${hash//\\/}"
                hash="${hash:0:128}"
                break
            fi
        fi

        (( retries > 0 )) && blkdev_wait "$1" 1 || break
        (( retries -= 1 ))
    done

    [[ -n "$hash" ]] && echo "$hash" || return 2
}

function blkdev_read() {
    # $1 block dev path
    # $2 length
    # $3 [offset:0]
    # $4 [retries:1]

    # RETRY CASE: valid and blkdev_wait() passed dev might still fail being accessed right after boot
    # Trivial debugging revealed that in the moment of fail the relevant /dev/ node doesn't exist
    # However it was definitely there just before (passed blkdev_wait and other checks) and relevant /dev/disk/by-*/ are also there
    # The node then just reappears a moment later, and there is nothing faulty in dmesg
    # All sorts of failures possible: test -b, dd zero-len, dd in-the-middle
    # Reproducible at least in QEMU with SATA vdisks

    # ensure byte-length counting
    LANG=C LC_ALL=C

    if [ -z "$1" ] || [ -z "$2" ] || (( $2 <= 0 )); then
        echo "blkdev_read(): bad call: invalid arguments" >&2
        return 1
    fi

    local retries=${4:-1}
    local data

    while [ -z "$data" ]; do
        if [ ! -b "$1" ]; then
            echo "blkdev_read(): blockdev path [$1] is invalid or device not yet ready" >&2
        elif [ ! -r "$1" ]; then
            echo "blkdev_read(): missing read perm on given blockdev [$1]" >&2
        else
            # Replacing NULLs as they are var-terminators in bash, but preserving data byte-length
            data=$(dd if="$1" bs=$2 count=1 iflag=skip_bytes skip=${3:-0} status=none 2>/dev/null | sed 's/\x00/\x1a/g' 2>/dev/null)
            if [ ${#data} != $2 ]; then #watch out for LANG & LC_ALL
                echo "blkdev_read(): read failed: only ${#data} out of $2 bytes read" >&2
                data=""
            else
                break
            fi
        fi

        (( retries > 0 )) && blkdev_wait "$1" 1 || break
        (( retries -= 1 ))
    done

    [[ -n "$data" ]] && echo "$data" || return 2
}

function blkdev_write() {
    # $1 data
    # $2 block dev path
    # $3 [offset:0]
    # $4 [retries:1]

    # RETRY CASE: see notes in blkdev_read()

    # ensure byte-length counting
    LANG=C LC_ALL=C

    if [ -z "$1" ] || [ -z "$2" ]; then
        echo "blkdev_write(): bad call: invalid arguments" >&2
        return 1
    fi

    local retries=${4:-1}
    local error
    local lenwr

    while [ -z "$lenwr" ]; do
        if [ ! -b "$2" ]; then
            echo "blkdev_write(): blockdev path [$2] is invalid or device not yet ready" >&2
        elif [ ! -w "$2" ]; then
            echo "blkdev_write(): missing write perm on given blockdev [$2]" >&2
        else
            lenwr=${#1}
            error=$(dd of="$2" bs=$lenwr count=1 oflag=seek_bytes seek=${3:-0} conv=notrunc,fsync status=none <<< "$1" 2>&1)
            if [ $? -ne 0 ]; then
                echo "blkdev_write(): write failed: $error" >&2
                lenwr=""
            else
                break
            fi
        fi

        (( retries > 0 )) && blkdev_wait "$2" 1 || break
        (( retries -= 1 ))
    done

    [[ -n "$lenwr" ]] && echo "$lenwr" || return 2
}

function blkdev_model() {
    # $1 block dev path
    # $2 [retries:1]

    # RETRY CASE: see notes in blkdev_read()

    if [ -z "$1" ]; then
        echo "blkdev_model(): none or empty path given" >&2
        return 1
    fi

    local retries=${2:-1}
    local model
    local pdev

    while [ -z "$model" ]; do
        if [ ! -b "$1" ]; then
            echo "blkdev_model(): blockdev path [$1] is invalid or device not yet ready" >&2
        else
            model="$(lsblk -no MODEL $1 2>&1)"
            if [ $? -ne 0 ]; then
                echo "blkdev_model(): lsblk[$1] failed: $model" >&2
                model=""
            elif [ -z "$model" ]; then
                # Succeeded, but no model info, trying parent dev
                pdev="$(lsblk -pno PKNAME $1 2>&1)"
                if [ $? -ne 0 ]; then
                    echo "blkdev_model(): lsblk[$1] failed: $pdev" >&2
                else
                    pdev="${pdev//[[:space:]]/}"
                    [[ -n "$pdev" ]] && model=$(lsblk -no MODEL "$pdev" 2>&1) || model="$1"
                    if [ $? -ne 0 ]; then
                        echo "blkdev_model(): lsblk[$pdev] failed: $model" >&2
                        model=""
                    else
                        # parent also has no model info
                        [[ -z "$model" ]] && model="$pdev"
                        break
                    fi
                fi
            else
                break
            fi
        fi

        (( retries > 0 )) && blkdev_wait "$1" 1 || break
        (( retries -= 1 ))
    done

    [[ -n "$model" ]] && echo "$model" || echo "$1"
}

function blkdev_wait() {
    # $1 block dev path
    # $2 [timo_init_sec:3]    wait dev initialized, 0 disables this wait
    # $3 [timo_added_sec:0]    wait dev just added (before waiting for init), 0 disables this wait

    # Separate timos allow waiting for dev being added for some short time
    # and then continue waiting longer for init only if dev actually present
    # might be useful with slow USB media

    if [ -z "$1" ]; then
        echo "blkdev_wait(): none or empty path given" >&2
        return 1
    fi

    local timo_i=${2:-3}
    local timo_a=${3:-0}
    local error

    if (( timo_a <= 0 && timo_i <= 0 )); then
        echo "blkdev_wait(): bad call: invalid arguments" >&2
        return 1
    fi

    if (( timo_a > 0 )); then
        echo "blkdev_wait(): waiting up to $timo_a sec for blockdev $1 being added ..." >&2
        error=$(udevadm wait --initialized=false --timeout=$timo_a "$1" 2>&1)
        if [ $? -ne 0 ]; then
            echo "blkdev_wait(): timeout add-waiting for $1: $error" >&2
            return 2
        fi
    fi
    if (( timo_i > 0 )); then
        echo "blkdev_wait(): waiting up to $timo_i sec for blockdev $1 being init ..." >&2
        error=$(udevadm wait --initialized=true --timeout=$timo_i "$1" 2>&1)
        if [ $? -ne 0 ]; then
            echo "blkdev_wait(): timeout init-waiting for $1: $error" >&2
            return 2
        fi
    fi

    return 0
}


function encrypt_base64() {
    # $1 plaintext
    # $2 key (string key or "tpm:credname:PCRs" to use TPM2)
    # $3 [intermediate_key] - double encryption

    if [ -z "$1" ] || [ -z "$2" ]; then
        echo "encrypt_base64(): bad call: missing required args" >&2
        return 1
    fi

    local plaintext
    local ciphertext
    local tmp
    local ret

    if [ -n "$3" ]; then
        plaintext=$(encrypt_base64 "$1" "$3"); ret=$?
        if [ $ret -ne 0 ]; then
            echo "encrypt_base64(): intermediate-encrypt failed: $ret" >&2
            return $ret
        fi
    else
        plaintext="$1"
    fi

    if [ "${2:0:4}" == "tpm:" ]; then
        systemd-creds has-tpm2 >/dev/null 2>&1
        if [ $? -ne 0 ]; then
            echo "encrypt_base64(): TPM-assisted encryption requested but host has no TPM2 available" >&2
            return 2
        fi
        tmp="${2:4}"
        ciphertext=$(systemd-creds --with-key=tpm2 --name="${tmp%:*}" --tpm2-pcrs="${tmp##*:}" encrypt - - <<< "$plaintext" 2>&1); ret=$?
    else
        ciphertext=$(openssl aes-256-cbc -a -pbkdf2 -pass pass:"$2" <<< "$plaintext" 2>&1); ret=$?
    fi
    if [ $ret -ne 0 ]; then
        echo "encrypt_base64(): failed to encrypt token: $ret: $ciphertext" >&2 # ciphertext is stderr here
        return 2
    fi

    ciphertext=$(tr -d '\r\n' <<< "$ciphertext" 2>/dev/null)
    if [ $? -ne 0 ]; then
        echo "encrypt_base64(): ciphertext postprocessing failed" >&2
        return 2
    fi
    if [ -z "$ciphertext" ]; then
        echo "encrypt_base64(): failed to encrypt token: got empty ciphertext" >&2
        return 2
    fi

    echo $ciphertext
    return 0
}

function decrypt_base64() {
    # $1 ciphertext
    # $2 key (string key or "tpm:credname:PCRs" to use TPM2)
    # $3 [intermediate_key] - double encryption

    if [ -z "$1" ] || [ -z "$2" ]; then
        echo "decrypt_base64(): bad call: missing required args" >&2
        return 1
    fi

    local plaintext
    local tmp
    local ret

    if [ "${2:0:4}" == "tpm:" ]; then
        systemd-creds has-tpm2 >/dev/null 2>&1
        if [ $? -ne 0 ]; then
            echo "decrypt_base64(): TPM-assisted decryption requested but host has no TPM2 available" >&2
            return 2
        fi
        tmp="${2:4}"
        plaintext=$(systemd-creds --with-key=tpm2 --name="${tmp%:*}" decrypt - - <<< "$1" 2>/dev/null); ret=$?
    else
        plaintext=$(openssl aes-256-cbc -d -a -A -pbkdf2 -pass pass:"$2" <<< "$1" 2>/dev/null); ret=$?
    fi
    if [ $ret -ne 0 ]; then
        echo "decrypt_base64(): failed to decrypt token: $ret" >&2
        return 2
    fi
    if [ -z "$plaintext" ]; then
        echo "decrypt_base64(): failed to decrypt token: got empty plaintext" >&2
        return 2
    fi

    if [ -n "$3" ]; then
        plaintext=$(decrypt_base64 "$plaintext" "$3"); ret=$?
        if [ $ret -ne 0 ]; then
            echo "decrypt_base64(): intermediate-decrypt failed: $ret" >&2
            return $ret
        fi
    fi

    echo $plaintext
    return 0
}

function garbage_base64() {
    # $1 length
    # $2 [relaxed length]
    # $3 [source:/dev/urandom]

    # ensure byte-length counting
    LANG=C LC_ALL=C

    if [ -z "$1" ] || (( $1 <= 0 )); then
        echo "garbage_base64(): none or invalid length requested" >&2
        return 1
    fi

    local garbage

    garbage=$(dd if="${3:-/dev/urandom}" bs=$1 count=1 status=none 2>/dev/null | base64 --wrap=0 2>/dev/null)
    if [ -z "$garbage" ]; then
        echo "garbage_base64(): failed to collect any garbage data" >&2
        return 2
    fi
    if [ -z "$2" ] && [ ${#garbage} -lt $1 ]; then
        echo "garbage_base64(): failed to collect enough garbage: only ${#garbage} out of $1 collected" >&2
        return 2
    fi

    echo "${garbage:0:$1}"
    return 0
}